Three Bay Garage and Veranda |
|||||||
|
|
|||||||
|
The plot was established
for the base and work commenced clearing this, to then
dig the foundations for the Oak posts to sit on and the
concrete base. |
|
||||||
|
|
|
||||||
|
Once the concrete was set,
the dwarf wall was completed and the timber frame
erected. |
|
||||||
|
Then the front and rear Oak
frame was erected along with the roof timbers, then the
slate roof. This is reclaimed Welsh slate which matches
in with the slate on the main Victorian farmhouse. |
|
||||||
|
Old farmhouse red tiles
were sourced for the veranda flooring, again which match
in with tiles found in parts of the main house. |
|
||||||
|
The weatherboard cladding
was then put in place, in this case waney edge Oak,
which gives a real traditional/old look. |
|
||||||
|
This photograph shows the
two centre Oak posts standing on staddle stones, cut
from local red sandstone. The two outer Oak posts stand
on the dwarf wall. The knee brace joints can also be
seen, apart from giving a traditional look, these are
part of the actual structure, holding the posts in place
and supporting the eaves beams. |
|
||||||
|
On the veranda four Oak
posts and eaves beams also make up part of the
structure. These all sit on staddle stones. |
|
||||||
|
Guttering on either side of
the roof takes rainwater to a nearby purpose built
soakaway. |
|
||||||


